Welcome to the Burnaby Association of Marine Modellers or BAMM
A Word from the President
On Behalf of the members of the Burnaby Association of Marine Modellers, it is my pleasure to welcome you to our website and the world of Marine Models.
Our home is the beautiful pond in Central Park located in Burnaby B.C. surrounded by beautiful trees and walkways. Burnaby allows us exclusive use of the pond Sundays and Wednesday mornings. Club members come from all over not only to run our boats, but most importantly to meet as friends and promote our hobby.
Whether you have purchased a ready to run boat or are a scratch built modeller our club welcomes you. You will find that members are more than willing to share their knowledge and help everyone build the model of their dreams.
See you at the pond!
At the Pond slideshow:
July 26, 2020
Photos by U. Gaede
(Click the photo above for a slide show.)
At the pond:
It was a hot and sunny Sunday at the pond. The Shell Welder was launched and run around the pond by several members plus a special guest from Ontario. Frank, a member of the Confederation Marine Modellers of Hamilton who was visiting our fine province had a nice long run at running the Shell Welder. It was nice to see him again as I had the pleasure of visiting one of their venues last summer and have included a few photos from that visit above. Also a photo of my try at converting a tiny table top model of Theodore Tugboat to a RC model boat. I took a tiny RC speedboat and glued it to the bottom. It kinda works! Since the real boat is up for sale I thought I'd also include a couple of photos I took while visiting Halifax harbour a few years back.
Calendar of Events
The BAMM Regatta this year will not be held on Sunday, August 16 because of the Covid 19 situation.
Events will not include:
-team towing course
If you have come here for information and have questions and/or want to be put on the e-mail list for updates and info just head over to the "Contact" page and send us an e-mail message to that effect.
Any thoughts, corrections, complaints, or constructive criticism will certainly be greatly appreciated. Just go to the "Contact" page and drop me a note. I am also looking for content. Photos, videos or articles will be appreciated.
Thanks - Ulrich
Announcements and Current Events
Re: Covid 19 Virus
Date: Wed, June 17, 2020
We have received the approval from Burnaby Parks to reopen club activities starting Wednesday June 17 2020. Our first
Sunday opening was June 21 2020.
Please note that part of the Burnaby Allotment agreement is that we must assure compliance of the plan by all members.
Moving forward we count on everyone's support and trust we can be back to sailing our boats.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The weather was bright and sunny on Sunday, March 10th, 2019. There was just one big ice flow left on the pond in the shadow of some trees so Lorne M. and I decided to push it out into the sun to melt. It was attached by some thinner ice so I was able to break through and get it going. Many thanks to Mel for breaking the flow free from shore and of course my lovely cameraman Rick.
We have added a very nice model of the Shell Welder to the BAMM fleet. With surprisingly little TLC she has become fun to run and fun to tow.
In 1976 the 10 foot 8 inch long (that is 3/4 in. per foot or 1/16th scale) highly detailed RC tanker "Shell Welder", formerly “AARDVARK”, was completed by BAMM members Bram and Alex Deruiter. Bram is shown in the slideshow here (first picture) posing with the model at her official re-launch on May 6, 2018. For many years the tanker sailed the BAMM pond before being sold and moved to Bowen Island. She was also featured in the RC pond at Expo 86. Recently, Dave Tarvin of Burnaby Hobbies acquired it and it was subsequently sold to Bram Deruiter returning it to one of the original builders. Our president Rick Evans saw an opportunity to bring the vessel back to the BAMM pond and we have recently purchased it from Bram. It was in very good condition and only needed a gentle refurbishment and running gear update. Here is a link to some information on the original 170 foot long Shell Welder the model was based on.
Below you will find a profile of Lorne Scott. This is the first of what we hope will be many such profiles which will have their own page here on our website.